RadiForce EIZO
 

 

RadiForce G33

 

 
 
RaidForce G33 和 G33-N灰階顯示器是針對醫療判讀過程中做準榷的判斷,包含PACS、胸科放射學、CT,MRI和血管等 影像。並從13-bit下輸出8161的灰色階層,同時支援4096階調中(12-bit)的醫療顯示能力。
 

 
 
 

12-Bit Simultaneous Grayscale Display

A 13-bit look-up table produces a palette of 8,161 grayscale tones from which 4,096 (12-bit) tones can be displayed simultaneously, ensuring a highly-refined grayscale. Along with aperture modulation technology, a different area ratio for each sub-pixel is displayed; providing a higher number of grayscale tones.
12-bit graphics board and 12-bit viewer software needed for 12-bit display.

12-Bit Simultaneous Grayscale Display

..........................................................................................................

DUE for Brightness Uniformity

To sustain image consistency, brightness uniformity is required for medical imaging monitors. However, unified luminance of the backlight is difficult to attain due to the characteristics of LCD monitors. The Digital Uniformity Equalizer (DUE) function provides optimum backlight luminance uniformity.

DUE for Brightness Uniformity

..........................................................................................................

Calibration Mode Selection

Selectable with the front panel buttons, the CAL Switch function allows for various calibration modes of different modalities such as CR, CT, and endoscope images. Furthermore, with ScreenManager Pro for Medical installed, auto mode settings can be made with the Auto CAL Switch function.

Calibration Mode Selection

..........................................................................................................

 

Built-In Swing Sensor

Built-In Swing Sensor

Built directly inside the upper bezel, the built-in swing sensor is completely hidden from the viewing area of the screen and is conveniently enabled and visible only when remote quality control operations are being performed, such as calibration.
Compatible with RadiCS and RadiNET Pro versions 2.00 and later.

..........................................................................................................

Lifetime Expectancy Analyzer (LEA)

Lifetime Expectancy Analyzer (LEA)

The Lifetime Expectancy Analyzer (LEA) function provides an estimation of the remaining backlight lifetime for the service provider. It displays the time used since the purchase date, and the expected remaining lifetime depending on how often the monitor is used and at what luminance level.
Compatible with RadiCS version 2.00 and later.

..........................................................................................................

LCD Panel Protector

This anti-reflective panel protector is pre-attached to the monitor at production for protection against dust and scratches.

..........................................................................................................

Pairing Monitors

Pairing Monitors

Effective when comparing medical images side by side, Radiologists often require multiple monitors to compare newly taken images and previous images for diagnosis. EIZO offers the same color and grayscale for two monitors bundled as a pair in one box

 

...........................................................................................................

Backlight Saver

With ScreenManager Pro for Medical utility software installed, the Backlight Saver function allows for the monitor's backlight to turn off when the Screen-Saver activates and the monitor's backlight to turn on when the computer comes out of the Screen-Saver mode. This function helps to reduce power consumption when the monitor is used for a prolonged period of time.

Backlight Saver

 
 
 
PAGETOP
Copyright (c) 2004 EIZO NANAO CORPORATION. All Rights Reserved.